Hikvision Doorbell / Videointercom integration
It should work, your indoor 9510 is the same as what I have… Reject = only works when the indoor is ringing, this method gives the decline tone Alternative, you can first send answer and then hangup,...
View ArticleHikvision Doorbell / Videointercom integration
I did my test while ringing the doorbell, the indoor station rings and works as usual. For some reason I always get the same error as above: 29, ‘Device operation failed’. I also tested answering...
View ArticleHikvision Doorbell / Videointercom integration
Indeed, answer+hangup doesn’t work, when not connected to hikconnect… Have you tried the reject command? Maybe hikconnect is also needed for this specific device… It works for me, I’m connected to...
View ArticleHikvision Doorbell / Videointercom integration
Btw…may be someone has the idea or already met the following issue. I have my doorbell connected to SIP. It works quite well, I get a call on my SIP client when the button on the doorbell is pressed....
View ArticleHikvision Doorbell / Videointercom integration
Isn’t that something you need to configure in your dialplan to add ringback? Read full topic
View ArticleHikvision Doorbell / Videointercom integration
I just enabled Hikconnect on the indoor station KH9510-WTE1(B) and it turns out that it fixes error 29. All commands via mqtt work and the two-way audio works fine. A bit disappointed because I was...
View ArticleHikvision Doorbell / Videointercom integration
Also for HomeKit users, using Scrypted with vityevato’s hikvision plugin still doesn’t work with two-way audio, despite enabling Hikconnect on KH9510. I think the plugin is still trying to send Reject...
View ArticleHikvision Doorbell / Videointercom integration
Yeah I don’t know why hikconnect is needed to send those commands;-( If you want to go fully local, sip is indeed an alternative Read full topic
View ArticleHikvision Doorbell / Videointercom integration
when I do a call (the same configuration like for doorbell) from SIP client I get a ring - so, it looks that customizing on SIP server is ok Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Hello, I have DS-KV9503-WBE1 working with your add-on. I installed magnetic contact sensor to AI1 and it is working fine. I receive two magnetic_door_status events, one when I open the door and one...
View ArticleHikvision Doorbell / Videointercom integration
Can we proceed on GitHub for this Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Hi folks, thanks for the great work with this addon! I purchased a DS-KV8113-WME1(B) outdoor unit, which works fine with frigate (with username and password). I tried to connect to it with this addon,...
View ArticleHikvision Doorbell / Videointercom integration
maybe strange character in password? are you using the admin account? maybe a firmware upgrade? reboot? Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Weird I just changed the password to something else and it worked. Previous password was alphanumeric, no strange characters. Read full topic
View ArticleHikvision Doorbell / Videointercom integration
I followed your tutorial and installed Asterisk to use SIP. I set it up as an extension in the indoor station. It registered successfully. However, I don’t understand what to do from here. How can I...
View ArticleHikvision Doorbell / Videointercom integration
If you are using SIP, you don’t need to use answer commands from the addon, you need to use sip to answer Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Hi Fabio👋 I have the Doorbell KV-8213 with 2 Buttons. Is it possible to use this only with HomeAssistant (without Indoor Station)? I want use your Addon Hikvision Doorbell and the Frigate for 2way...
View ArticleHikvision Doorbell / Videointercom integration
Uh, not sure , my addon doesn’t have any relationship with frigate, I created an basic guide to start with frigate, if you follow that guide , it’s a good start point, make sure to setup https and a...
View ArticleHikvision Doorbell / Videointercom integration
Okay thank you! Do you know how can I set the doorbell button, for example button 1 goes to tablet 1 and button 2 goes to tablet 2? Read full topic
View ArticleHikvision Doorbell / Videointercom integration
On the Doorstation itself, you can define SIP numbers, that way you can call different devices (You need a Doorstation with multiple buttons offcourse) Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Of course I have the door Station KV-8213 with 2 Buttons. Which add on for home assistant i need to Setup the SIP numbers for the Doorstation? Read full topic
View ArticleHikvision Doorbell / Videointercom integration
There is an asterisk addon, it’s preconfigured to call a Lovelace card Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Here is an example using yeastar for example… help.yeastar.com Integrate Yeastar P-Series PBX System with Hikvision Intercom Video Devices This guide provides a configuration example to show you how...
View ArticleHikvision Doorbell / Videointercom integration
For Asterisk you don’t need the indoor station to forwarding the call? Read full topic
View ArticleHikvision Doorbell / Videointercom integration
Indeed, for SIp, no indoor station is needed Read full topic
View Article
More Pages to Explore .....